High-quality SPA Jacuzzi hot tubs and endless swimming pools require high-quality production technology and scientific maintenance for daily use.AquapringSpas combines years of industry experience to summarize the following practical maintenance tips to help you easily extend the service life of the bathtub and maintain optimal performance!
You can think of a Spa Hot Tub as a small swimming pool requiring the same basic care. 1. Clean regularly to avoid dirt accumulation. (Clean)
2. Control water temperature and water volume to maintain water circulation. (Water circulation)
3. Use chemical composition reasonably. (Chemical composition)
1. Clean regularly to avoid dirt accumulation.
- Wipe the surface with a neutral detergent (such as a special acrylic cleaner) every week, and avoid using strong acids, strong alkali or detergents containing abrasive particles to avoid damaging the acrylic material.
- The drain outlet needs to be cleaned of debris regularly to ensure smooth water flow and avoid blockages that cause equipment failures.
2. Control water temperature and water volume to maintain water circulation.
- It is recommended that the water temperature does not exceed 40℃. High temperature can accelerate the aging of seals and may affect the performance of the insulation layer.
- Avoid exceeding the "maximum water level" marked on the bathtub when filling water. Exceeding the water level may cause water overflow, making the floor slippery and increasing the risk of falling, especially for children or people with limited mobility.
- The Spa jacuzzi hot tub is equipped with a self-independent circulation filtration system, which ensures that it runs once or twice a day. These cycles circulate the water for about 15 to 20 minutes (or longer) to ensure that all the water in the bathtub passes through the filter.
3. Use chemical composition reasonably.
- The amount of disinfectant must be added strictly according to the instructions. Excessive use may cause the seal to harden and leak.
- Do not overuse chemicals. The pH value of the water should be controlled between 7.4 and 7.6. pH values below this range are too acidic and may corrode hardware, and may irritate the skin and eyes. pH values above this range are too alkaline, which will reduce the effectiveness of the disinfectant and easily cause turbidity.
AquapringSpas always takes user needs as the core, and provides full escort from production to after-sales. Choosing our products, you can not only enjoy the excellent quality brought by imported acrylic materials and strict quality inspection standards, but also keep the bathtub as new through scientific maintenance! Contact customer service immediately to get more professional maintenance guides!
