Proper Maintenance of Hot Tubs for Longer Service Life & Peace of Mind

Control Panel Maintenance

· Don't touch the control panel with hard objects to avoid scratches on the surface.

· Avoid prolonged direct sunlight to prevent panel aging and functional damage.

· Cover the control panel when not in use to reduce external impacts on the equipment.

Insulation Cover Maintenance

· Wipe the cover with soapy water for cleaning. Take great care not to let soapy water seep into the Spa Hot Tub, which may cause moisture damage to internal parts.

· Never remove the cover by pulling the middle connecting rod, as this part is structurally fragile and easily damaged by improper force.

· It is strictly prohibited to sit, lie down or jump on the insulation cover.

Filter Cartridge Maintenance

The filter cartridge shall be cleaned regularly. Remove the filter cartridge and rinse it with a high-pressure hose once a week. Soak the cartridge in filter cleaning solution, then rinse it with a high-pressure hose once a month. It is recommended to replace the old filter cartridge every 3–6 months.

Special reminder: Always turn off the power of the spa hot tub before handling the filter cartridge. This prevents impurities from being sucked into the circulation pump or heater and causing equipment malfunction. Users are advised to keep this rule in mind to avoid unnecessary losses.

Maintenance When the Hot Tub Is Not in Use

· If out of use for more than 2 months: Turn off the power and drain all water from the hot tub. Even when empty, keep the insulation cover closed to protect the equipment.

· If out of use for 5–14 days: Set the unit to the lowest temperature or sleep mode, adjust the pH value and perform water treatment, then cover with the insulation cover. Readjust the pH value before reuse to ensure water quality standards.

· If out of use for 3–5 days: Test the pH level and disinfectant level of the spa water and adjust if necessary. Before reuse, recheck the pH balance and complete water treatment as required.

· If out of use for more than 15 days: Cut off the power, open the drain valve and empty the hot tub. Keep the tub dry, cover it with the insulation cover and fit the dust cover for full moisture and dust protection.

Standard operation can not only extend the service life of the equipment, but also ensure safe use and optimal experience. Aquaspring recommends all users follow the above maintenance guidelines, so that your hot tub can continuously bring comfort and convenience to your home life. Moving forward, Aquaspring will continue to share maintenance tips for spa hot tubs and launch more thoughtful services to safeguard your comfortable lifestyle.